Zum Inhalt springen


Electronic Unit Injectors Tester

The UIS-Tester is designed to test and verify the performance of pump injectors (UIS -Unit Injector System) and individual high pressure fuel pumps with high pressure solenoid valves (UPS -Unit Pump System).

The UIS-Tester has the possibility of measuring the response time of the electric valve as well as the automatic control of the measuring unit actuator, it has the possibility of updating the firmware and adapting to different CAMBOX versions by itself.

The UIS-Tester device allows:

  • Set the control signal of a high pressure solenoid valve;
  • Measure the camshaft speed of the actuator;
  • Set the number of cycles required;
  • Preset mode, for 5 control mode of the solenoid valve;
  • Set any value of the advance angle of the solenoid valve.

Supply voltage

~ 220 V ± 15 %

Signal delay angle value

0° – 359°

Injections per minute

100 – 1500

Unit weight

8 kg

Dimensions (length x width x height)

365 x 320 x 110 mm

Power consumption up to

750 W


Soft-/Firmware                 Download


Documentation            UIS Tester EN


WordPress Cookie Hinweis von Real Cookie Banner